The Real Number System

The real number system evolved over time by expanding the notion of what we mean by the word “number.” At first, “number” meant something you could count, like how many sheep a farmer owns. These are called the natural numbers, or sometimes the counting numbers.

Natural Numbers

or “Counting Numbers”

1, 2, 3, 4, 5, . . .

• The use of three dots at the end of the list is a common mathematical notation to indicate that the list keeps going forever.

At some point, the idea of “zero” came to be considered as a number. If the farmer does not have any sheep, then the number of sheep that the farmer owns is zero. We call the set of natural numbers plus the number zero the whole numbers.

Whole Numbers

Natural Numbers together with “zero”

0, 1, 2, 3, 4, 5, . . .

About the Number Zero What is zero? Is it a number? How can the number of nothing be a number? Is zero nothing, or is it something? Well, before this starts to sound like a Zen koan, let’s look at how we use the numeral “0.” Arab and Indian scholars were the first to use zero to develop the place-value number system that we use today. When we write a number, we use only the ten numerals 0, 1, 2, 3, 4, 5, 6, 7, 8, and 9. These numerals can stand for ones, tens, hundreds, or whatever depending on their position in the number. In order for this to work, we have to have a way to mark an empty place in a number, or the place values won’t come out right. This is what the numeral “0” does. Think of it as an empty container, signifying that that place is empty. For example, the number 302 has 3 hundreds, no tens, and 2 ones. So is zero a number? Well, that is a matter of definition, but in mathematics we tend to call it a duck if it acts like a duck, or at least if it’s behavior is mostly duck-like. The number zero obeys most of the same rules of arithmetic that ordinary numbers do, so we call it a number. It is a rather special number, though, because it doesn’t quite obey all the same laws as other numbers—you can’t divide by zero, for example. Note for math purists: In the strict axiomatic field development of the real numbers, both 0 and 1 are singled out for special treatment. Zero is the additive identity, because adding zero to a number does not change the number. Similarly, 1 is the multiplicative identity because multiplying a number by 1 does not change it.

Even more abstract than zero is the idea of negative numbers. If, in addition to not having any sheep, the farmer owes someone 3 sheep, you could say that the number of sheep that the farmer owns is negative 3. It took longer for the idea of negative numbers to be accepted, but eventually they came to be seen as something we could call “numbers.” The expanded set of numbers that we get by including negative versions of the counting numbers is called the integers.

Integers

Whole numbers plus negatives

. . . –4, –3, –2, –1, 0, 1, 2, 3, 4, . . .

About Negative Numbers How can you have less than zero? Well, do you have a checking account? Having less than zero means that you have to add some to it just to get it up to zero. And if you take more out of it, it will be even further less than zero, meaning that you will have to add even more just to get it up to zero. The strict mathematical definition goes something like this: For every real number n, there exists its opposite, denoted – n, such that the sum of n and – n is zero, or n + (– n) = 0 Note that the negative sign in front of a number is part of the symbol for that number: The symbol “–3” is one object—it stands for “negative three,” the name of the number that is three units less than zero. The number zero is its own opposite, and zero is considered to be neither negative nor positive. Read the discussion of subtraction for more about the meanings of the symbol “–.”

The next generalization that we can make is to include the idea of fractions. While it is unlikely that a farmer owns a fractional number of sheep, many other things in real life are measured in fractions, like a half-cup of sugar. If we add fractions to the set of integers, we get the set of rational numbers.

Rational Numbers

All numbers of the form , where a and b are integers (but b cannot be zero)
Rational numbers include what we usually call fractions

• Notice that the word “rational” contains the word “ratio,” which should remind you of fractions.

The bottom of the fraction is called the denominator. Think of it as the denomination—it tells you what size fraction we are talking about: fourths, fifths, etc.

The top of the fraction is called the numerator. It tells you how many fourths, fifths, or whatever.

• RESTRICTION: The denominator cannot be zero! (But the numerator can)

If the numerator is zero, then the whole fraction is just equal to zero. If I have zero thirds or zero fourths, than I don’t have anything. However, it makes no sense at all to talk about a fraction measured in “zeroths.”

• Fractions can be numbers smaller than 1, like 1/2 or 3/4 (called proper fractions), or they can be numbers bigger than 1 (called improper fractions), like two-and-a-half, which we could also write as 5/2

All integers can also be thought of as rational numbers, with a denominator of 1:

This means that all the previous sets of numbers (natural numbers, whole numbers, and integers) are subsets of the rational numbers.
Now it might seem as though the set of rational numbers would cover every possible case, but that is not so. There are numbers that cannot be expressed as a fraction, and these numbers are called irrational because they are not rational.

Irrational Numbers

• Cannot be expressed as a ratio of integers.
• As decimals they never repeat or terminate (rationals always do one or the other)

Examples: 

	Rational (terminates)
	Rational (repeats)
	Rational (repeats)
	Rational (repeats)
	Irrational (never repeats or terminates)
	Irrational (never repeats or terminates)

 

More on Irrational Numbers It might seem that the rational numbers would cover any possible number. After all, if I measure a length with a ruler, it is going to come out to some fraction—maybe 2 and 3/4 inches. Suppose I then measure it with more precision. I will get something like 2 and 5/8 inches, or maybe 2 and 23/32 inches. It seems that however close I look it is going to be some fraction. However, this is not always the case. Imagine a line segment exactly one unit long: Now draw another line one unit long, perpendicular to the first one, like this: Now draw the diagonal connecting the two ends: Congratulations! You have just drawn a length that cannot be measured by any rational number. According to the Pythagorean Theorem, the length of this diagonal is the square root of 2; that is, the number which when multiplied by itself gives 2. According to my calculator, But my calculator only stops at eleven decimal places because it can hold no more. This number actually goes on forever past the decimal point, without the pattern ever terminating or repeating. This is because if the pattern ever stopped or repeated, you could write the number as a fraction—and it can be proven that the square root of 2 can never be written as for any choice of integers for a and b. The proof of this was considered quite shocking when it was first demonstrated by the followers of Pythagoras 26 centuries ago.

The Real Numbers

• Rationals + Irrationals
• All points on the number line
• Or all possible distances on the number line

When we put the irrational numbers together with the rational numbers, we finally have the complete set of real numbers. Any number that represents an amount of something, such as a weight, a volume, or the distance between two points, will always be a real number. The following diagram illustrates the relationships of the sets that make up the real numbers.

An Ordered Set

The real numbers have the property that they are ordered, which means that given any two different numbers we can always say that one is greater or less than the other. A more formal way of saying this is:
For any two real numbers a and b, one and only one of the following three statements is true:

1.      a is less than b, (expressed as a < b)

2.      a is equal to b, (expressed as a = b)

3.      a is greater than b, (expressed as a > b)

The Number Line

The ordered nature of the real numbers lets us arrange them along a line (imagine that the line is made up of an infinite number of points all packed so closely together that they form a solid line). The points are ordered so that points to the right are greater than points to the left:

• Every real number corresponds to a distance on the number line, starting at the center (zero).
• Negative numbers represent distances to the left of zero, and positive numbers are distances to the right.
• The arrows on the end indicate that it keeps going forever in both directions.

Absolute Value 

When we want to talk about how “large” a number is without regard as to whether it is positive or negative, we use the absolute value function. The absolute value of a number is the distance from that number to the origin (zero) on the number line. That distance is always given as a non-negative number.
In short:

• If a number is positive (or zero), the absolute value function does nothing to it:
• If a number is negative, the absolute value function makes it positive:

WARNING: If there is arithmetic to do inside the absolute value sign, you must do it before taking the absolute value—the absolute value function acts on the result of whatever is inside it. For example, a common error is

   (WRONG)

The correct result is